How To Make A Surfboard Rack

# 3 Speaking of LCR RIAA bridged T, often used to brand Tango, this is because in past years has been so popular, they have led other manufacturers to take it as a reference.
This is good because, as I said, the Tango EQ-600P is an RIAA which looks at the theoretical perfection is that the test bench.
inevitability, this desirable state of affairs lies with controversial matters, which need to outline to follow up the necessary program reflective.

A component of the highest quality, definitely favors the development a good project, but will be a key strategy it is managed to maximize its potential.

We have seen that the eclectic Thorsten, demonstrating skills and productive capacity of interpretation, has devised a highly original scheme.
As mentioned above, a best estimate made by the pilot to 600 ohms or less, but even this solution presents some delicate, for the purpose of a design aimed at the quality of music as the only imperative.

A classic solution is to interface to 600 ohm transformer.
There are various schemes that implement such a solution, but for convenience we take this example that describes a situation quite ideal, which schemino summarized as follows:



In the previous sentence, the use of the term "ideal" was referring to the processor used: Tango NP206. This transformer is of great quality and is able to perform its duties in an excellent.
is necessary to emphasize this fact, because it is not easy or cheap, find a transformer to the occasion. This is SE we're talking about a processor's first stage is a phono preamp, wrong component in this position, to cut oneself off finally obtain good results.
view of the strategy to use, does not make sense to resort to an LCR RIAA, to make it work if we create a situation that impoverishes the quality.
might as well use a RIAA with RC components. Even so, mind you, a passive RIAA-type RC, which is implemented well and with the right pilot valve, and divine sound travels fast.

I have not experienced in using the E810F (triode connected in this case), just a few tests, but I would say that this is a good choice.
In my opinion the most important advantage is the high value of transconductance, not only for the obvious and fundamental reason of noise, but the reference target the strategy of using the LCR RIAA that you are talking about.
It is necessary to consider other matters in dispute in reference to the processor. Positivissimo the fact that it is an SE, in this position histeresy problems are significant and a transformer with air gap is preferred. It also helps that it is not in Permalloy, but you create a Gordian knot of rival having less sensitivity and speed. And then the sensitivity and speed given the high value of transconductance E810F, contributes to the optimization of the strategy.

There are other considerations ... but reference to an upcoming update.